Milling tools made from CBN and diamond
For milling demanding brittle-hard materials and series parts, you will find milling cutters made of 4 cutting materials here: PCD, CVD-D, UltraDiamond and CBN.
Milling tools
- Diamond end mills ø0.90 – 20.00 mm
- CBN end mills ø0.20 – 12.00 mm / straight and twisted
- Diamond multi-tooth milling cutters with internal cooling, with up to 14 teeth
- Solid PCD milling cutters from ø0.40 – 6.00 mm with up to 55 teeth
Our milling tools are available in following materials for the displayed application areas:
Application range:
- Aluminium <10%Si
- Brass
- Zinc
- Plastics
- Graphite
Application range:
- Carbide G-type>8% Co
- Carbide K-type >15% Co
- Ceramic / Glass ceramic
- Aluminium >7%Si
- Titanum (Finishing operations)
- Copper/ Tungsten copper
- Composite materials CFRP / GFRP
- Glass / Plexiglass
- Other brittle non-ferrous materials
Application range:
- Carbide G-Sort <12%Co
- Carbide K-Sort >7%Co
- Carbide with Ni Binder
- Ceramic / Glass ceramic
- Quartzglass / Glass
- Other highly brittle non-ferrous materials
Application range:
- Hardened steels up to a hardness of 72HRC
- Hardened sintered steel
- Clear chilled cast iron
- Hardened tool steel up to 72 HRC
- Special alloys like ASP, CPM, HARDOX
- Stellite
- Carbide >20%Co
Contact us!
DTS GmbH
Hans-Geiger-Strasse 11a
D-67661 Kaiserslautern
Customer service
Business hours
Mo. - Fr. 8:00 - 16.30 Uhr
Mo. - Fr. 8:00 - 16.30 Uhr
Contact details
T: +49 (0) 6301 32011-0
F: +49 (0) 6301 32011-90
F: +49 (0) 6301 32011-90
English 
Deutsch